Page 1 of 1
Ascendis Caller ID beta version 2.0.0.7 now available
Posted: Fri Jun 29, 2007 7:24 am
by Bill Root
Version 2.0.0.7 includes the following changes from the previous beta release:
- fixed beta expiration problem with systems using non-US date formats
- Select Contact window: added name column; sort by name column initially
- restart Ascendis Caller ID automatically when stopped for repairing database
Known Issues:
- most of the help still includes version 1 images and terminology
- non-admin Vista users cannot see modem log
As always, bug reports and feedback are appreciated.
You can download this version here:
http://ascendis.com/callerid/CallerID_Beta_Setup.exe
The beta page is available here:
http://ascendis.com/callerid/beta.php
Posted: Fri Jun 29, 2007 4:53 pm
by ivan77
It works Excellent Bill! The suffix and prefix macros are very usefull.
Posted: Tue Jul 10, 2007 3:36 am
by GraemeP
Hi Bill,
The problem that you fixed here:
http://www.ascendis.com/forum/viewtopic.php?t=388
Has come back again!
When starting up the program stops with "New device detected - configure?" because there is a mobile phone plugged in to the PC.
Posted: Tue Jul 10, 2007 7:11 am
by Bill Root
Hi Graeme,
I just did a test in version 2.0.1.0 (the release version) and it looks like the fix is working as designed. (If you're still using 2.0.7.0, I expect the behavior to be the same.)
The fix I made prevents Ascendis Caller ID from automatically enabling new devices, which could end up disabling other devices. I did not remove the actual detection of new devices or the message.
Can you check whether the new device (a mobile phone connected via USB) is actually enabled, or whether a desired device (like a line on your Whozz Calling? box) was disabled? If neither has occurred, then ACID is working as expected, and I can look into disabling the new device message.
Finest regards,
Bill Root
Ascendis Software
Posted: Tue Jul 10, 2007 8:59 am
by GraemeP
Hi Bill,
I'm on 2.0.0.7 - I didn't realise there was a release one! But I assume it's the same version?
It's working as you say - just the message appearing.
A "disable detection" checkbox in options would suit me!
Posted: Tue Jul 10, 2007 11:54 am
by Bill Root
Hi Graeme,
GraemeP wrote:I'm on 2.0.0.7 - I didn't realise there was a release one! But I assume it's the same version?
No, several bug fixes and a lot of help work done after 2.0.0.7 went into the final release.
It's working as you say - just the message appearing.
A "disable detection" checkbox in options would suit me!
Ok, look for "Tell me about new devices" at the bottom of the Advanced page of the Options window in the next beta release.
Finest regards,
Bill Root
Ascendis Software