Page 1 of 1
Agere and Intel chipset modems
Posted: Mon Sep 11, 2006 10:20 am
by Chrlyman
Attempted to run Ascendis using a Lucent Winsoft modem with an Agere chipset without success. I also tried a new V92 faxmodem with an Intel chipset....still no go. I bought a dusty used conexant HSFI V92 for 5 bucks. It worls like a charm! I love the program so far. Still in trial period but I will most likely purchase it.
Afterthought re: Conexant HSFI V92 Modem
Posted: Mon Sep 11, 2006 10:24 am
by Chrlyman
I had to reboot in order for the "modem repair" init. string to take affect but, after that, it works fine.
Re: Afterthought re: Conexant HSFI V92 Modem
Posted: Tue Sep 12, 2006 6:28 am
by Bill Root
Hello Chrlyman,
It's common for modems to use chipsets that support caller id, but not include the extra bits of electronics to detect it. In such cases the modems usually respond "OK" to commands to enable caller id detection, but then report no caller information. The Repair Modem function waits for a call to come in to see whether the modem actually reports any caller information.
Finest regards,
Bill Root
Ascendis Software