Program speak to soon

Modem compatibility and configuration issues.
Post Reply
Guest

Program speak to soon

Post by Guest » Wed Mar 09, 2005 12:11 pm

The program responds after the first ring and announces "no caller information" and inmediatelly after the second ring, anounce and display the caller information received, making it very dificult to understand the information.

BellSouth in US is my telephone service provider and my modem model is "US Robotic V.92 Fax Win Int" with latest driver. I used the modem repair utility, which repaired some problems, but still, the main concern was not resolved.

I have tested a lot of caller ID programs and so far this is the most futures rich that I found.

Any solution? :?:

Bill Root
Site Admin
Posts: 976
Joined: Mon Jan 19, 2004 1:29 pm
Location: Perrysburg, OH
Contact:

Re: Program speak to soon

Post by Bill Root » Wed Mar 09, 2005 2:05 pm

Hello,

Could you please send a Technical Support Report, after the problem has occurred, to support "at" ascendis "dot" com? I'll have a look at the report and see whether I can figure out what's happening.

Finest regards,
Bill Root
Ascendis Software

Guest

Modem speak too soon

Post by Guest » Wed Mar 09, 2005 2:15 pm

:!: Fast tech support response too!

Bill Root
Site Admin
Posts: 976
Joined: Mon Jan 19, 2004 1:29 pm
Location: Perrysburg, OH
Contact:

Re: Modem speak too soon

Post by Bill Root » Wed Mar 09, 2005 5:25 pm

It looks like the problem arises because your modem sends more 'RING' messages than expected. If you haven't already tried it, the new beta version (1.8.1.6) has a change that will hopefully fix this. You can download it from the beta page:
http://ascendis.com/callerid/beta.php

Finest regards,
Bill Root
Ascendis Software
Last edited by Bill Root on Wed Oct 18, 2017 6:39 pm, edited 1 time in total.

Guest

Modem response fixed

Post by Guest » Thu Mar 10, 2005 11:23 am

:D Problem solved.

Thank you for the fix.

Continuing testing.

Post Reply