Two NMBR messages from modem

Use this forum to request and discuss features you would like to see added to Ascendis Caller ID.
Post Reply
anonymus_yu

double number format at my switchbox in Yugoslavia

Post by anonymus_yu »

Just got a caller id feature,but it seems that the telephone company is sending caller id fields like this : DATE,TIME,NMBR,NMBR,MESG,MESG.

The first NMBR is caller's number.
The second NMBR is my(callee) number.

Program displays/sees only second(last) NMBR number,but I need first!

Could be that option(first number only) be added?

Bill Root
Site Admin
Posts: 1008
Joined: Mon Jan 19, 2004 1:29 pm
Location: Perrysburg, OH
Contact:

Re: double number format at my switchbox in Yugoslavia

Post by Bill Root »

Hello anonymus_yu,

That is an interesting problem. I don't know yet whether we can work around it -- it depends on what TAPI does with the NMBR messages. Can you send us a Technical Support Report so we can determine whether a workaround is possible? First start Ascendis Caller ID and wait until the problem happens. Then select "Technical Support Report" on the Help menu. Click the Send button to send it to your email program. (The report is long so it may take a couple of minutes to appear in your email program.) If that doesn't work, click the Copy button and paste it into the "Detailed problem description" box on the Support Request Form here:
http://ascendis.com/callerid/support_form.php

Finest regards,
Bill Root
Ascendis Software
Last edited by Bill Root on Wed Oct 18, 2017 6:36 pm, edited 1 time in total.

anonymus_yu

Re: double number format at my switchbox in Yugoslavia

Post by anonymus_yu »

I sent the report.
Is the modem response specific by country selection of modem driver installation?

Maybe I should try other countries (current=USA or Germany,not sure which)

Thanks for such fast reply!

Bill Root
Site Admin
Posts: 1008
Joined: Mon Jan 19, 2004 1:29 pm
Location: Perrysburg, OH
Contact:

Re: double number format at my switchbox in Yugoslavia

Post by Bill Root »

The configured modem responses (in other words, the modem responses as defined by the modem configuration file) would not vary by country (in all likelihood, anyway). Typically the modem needs to be configured for the country in which it is operating. This is normally done through the Phone and Modem Options control panel. Presumably the modem firmware (or the modem drivers) interpret the signals coming in to the modem differently depending on the country setting. It's possible that a different country setting would improve the situation, although I would not expect it.

For others following this thread, anonymus_yu sent in the Technical Support Report which showed that although the modem was sending the NMBR message twice, TAPI was apparently ignoring the first one, and only sending the second one to Ascendis Caller ID. As far as I know, there is no way Ascendis Caller ID can workaround this problem while still using TAPI in the prescribed manner. I am also unaware of any configuration changes that would fix the problem. It's conceivable (though perhaps unlikely) that a different version of Windows (he was using Windows 98) or a different modem would behave better.

Finest regards,
Bill Root
Ascendis Software

Guest

Post by Guest »

I have exactly same problem with Apache A56SP-HCF PCI hardware modem and Swisscom (Switzerland). Is there a solution?

Bill Root
Site Admin
Posts: 1008
Joined: Mon Jan 19, 2004 1:29 pm
Location: Perrysburg, OH
Contact:

Two NMBR messages from modem

Post by Bill Root »

I have exactly same problem with Apache A56SP-HCF PCI hardware modem and Swisscom (Switzerland). Is there a solution?
Can you try Ascendis Caller ID in non-TAPI mode to see what happens? To enable this:

In Ascendis Caller ID:

1) Open the Options window
2) Click the Devices tab
3) Make sure the "Modems and TAPI" sub-page is showing
4) Select your modem in the list
5) Click the Properties button
6) Remove the check mark next to "Access through TAPI"
7) Click OK to save the change and close the Properties window
8) Click OK to save the change and close the Options window

If this does not solve the problem, please send a Technical Support Report (Help menu, Technical Support Report) and explain which NMBR message is correct.

Finest regards,
Bill Root
Ascendis Software

Anotherone

Post by Anotherone »

Thanks for fast answer.
There is no changes with recommended setting, Ascendis Caller ID detect my proper number as CallerID.

"NMBR = 0765763055" is Caller ID
"NMBR = 0328520925" is my number
"MESG = 455753442066726F6D205349454D454E53" is mean "EWSD from SIEMENS"

I asked my phone company too, but I didn't receive solution.

Ascendis Caller ID Technical Support Report

Generated : 02/06/2006 03:01:56 pm
OS : Windows XP Professional Service Pack SP2
Computer name : ANOTHER
Physical memory : 238 MB/1023 MB (free/total)
Program name : Caller ID
Program version : 1.9.1.0
Program filename : C:\Program Files\Ascendis Caller ID\CallerID.EXE
Program file date : 01/14/2006 10:57:58 am
Registrations : 0
Calls this run : 1
Rings this run : 2
Max rings in one call: 0


============================================================
====================== ACTIVITY LOG ========================
============================================================

06.02.2006 14:54:02 - Started
06.02.2006 14:54:03 - Caller ID Version 1.9.1.0 (14.01.2006 10:57:58)
06.02.2006 14:54:03 - C:\Program Files\Ascendis Caller ID\CallerID.EXE
06.02.2006 14:54:15 - Loaded phone number formats from "C:\Program Files\Ascendis Caller ID\United States.pnf"
06.02.2006 14:54:46 - Could not open "Whozz Calling?" on communications port "COM3". Another application may be using the port. Please close the application and try again.
06.02.2006 14:55:32 - Could not open "Whozz Calling?" on communications port "COM3". Another application may be using the port. Please close the application and try again.
06.02.2006 14:55:50 - Shutting down

06.02.2006 14:56:42 - Started
06.02.2006 14:56:42 - Caller ID Version 1.9.1.0 (14.01.2006 10:57:58)
06.02.2006 14:56:42 - C:\Program Files\Ascendis Caller ID\CallerID.EXE
06.02.2006 14:56:46 - Could not open "Whozz Calling?" on communications port "COM3". Another application may be using the port. Please close the application and try again.
06.02.2006 15:01:20 - Shutting down

06.02.2006 15:01:26 - Started
06.02.2006 15:01:27 - Caller ID Version 1.9.1.0 (14.01.2006 10:57:58)
06.02.2006 15:01:27 - C:\Program Files\Ascendis Caller ID\CallerID.EXE


============================================================
======================== DEVICES ===========================
============================================================
----------------------- Device #0
Class : TModemInfo
Dirty : False
Name : CXT10B5 - HCF PCI Modem
Description : CXT10B5 - HCF PCI Modem
IsTapiDevice : True
TapiId : 0
Installed : True
Use : True
Registered : False
Matched : True
AccessMode : COM Port
FastCallRefresh : True
ReopenOnCallEnd : False
LineCount : 1
New : False
LastGotCID : 02/06/2006 03:01:49 pm
LastGotNoCID :
CIDSuccessCount : 2
CIDFailureCount : 0
RingCount : 4
LastRang : 02/06/2006 03:01:49 pm
LastTapiError :
Modem ID : 0001
PortName : COM3
CIDEnableCommand : AT+VCID=1
CanEnableCID : True
SettingsBackedUp : False
SettingsBackedUpDate :
SettingsBackupPathname :
ResponsesBackedUp : False
ResponsesBackupPathname:
AttemptedRepair : False
AttemptedRepairDate :
Repaired : False
RepairedDate :
DeclinedRepair : False
DeclinedRepairDate :

----------------------- Device #1
Class : TDeviceInfo
Dirty : False
Name : RAS PPPoE Line0000
Description : RAS PPPoE Line0000
IsTapiDevice : True
TapiId : 1
Installed : True
Use : False
Registered : False
Matched : True
AccessMode : TAPI
FastCallRefresh : True
ReopenOnCallEnd : False
LineCount : 1
New : False
LastGotCID :
LastGotNoCID :
CIDSuccessCount : 0
CIDFailureCount : 0
RingCount : 0
LastRang :
LastTapiError :

----------------------- Device #2
Class : TDeviceInfo
Dirty : False
Name : RAS VPN Line 0
Description : RAS VPN Line 0
IsTapiDevice : True
TapiId : 2
Installed : True
Use : False
Registered : False
Matched : True
AccessMode : TAPI
FastCallRefresh : True
ReopenOnCallEnd : False
LineCount : 1
New : False
LastGotCID :
LastGotNoCID :
CIDSuccessCount : 0
CIDFailureCount : 0
RingCount : 0
LastRang :
LastTapiError :

----------------------- Device #3
Class : TDeviceInfo
Dirty : False
Name : WAN/ATM/ADSL miniport
Description : WAN/ATM/ADSL miniport
IsTapiDevice : True
TapiId : 3
Installed : True
Use : False
Registered : False
Matched : True
AccessMode : TAPI
FastCallRefresh : True
ReopenOnCallEnd : False
LineCount : 1
New : False
LastGotCID :
LastGotNoCID :
CIDSuccessCount : 0
CIDFailureCount : 0
RingCount : 0
LastRang :
LastTapiError :

----------------------- Device #4
Class : TDeviceInfo
Dirty : False
Name : Infrared Direct Linei
Description : Infrared Direct Linei
IsTapiDevice : True
TapiId : 4
Installed : True
Use : False
Registered : False
Matched : True
AccessMode : TAPI
FastCallRefresh : True
ReopenOnCallEnd : False
LineCount : 1
New : False
LastGotCID :
LastGotNoCID :
CIDSuccessCount : 0
CIDFailureCount : 0
RingCount : 0
LastRang :
LastTapiError :

----------------------- Device #5
Class : TDeviceInfo
Dirty : False
Name : WAN Miniport (L2TP)
Description : WAN Miniport (L2TP)
IsTapiDevice : True
TapiId : 5
Installed : True
Use : False
Registered : False
Matched : True
AccessMode : TAPI
FastCallRefresh : True
ReopenOnCallEnd : False
LineCount : 1
New : False
LastGotCID :
LastGotNoCID :
CIDSuccessCount : 0
CIDFailureCount : 0
RingCount : 0
LastRang :
LastTapiError :

----------------------- Device #6
Class : TDeviceInfo
Dirty : False
Name : LPT1T
Description : LPT1T
IsTapiDevice : True
TapiId : 6
Installed : True
Use : False
Registered : False
Matched : True
AccessMode : TAPI
FastCallRefresh : True
ReopenOnCallEnd : False
LineCount : 1
New : False
LastGotCID :
LastGotNoCID :
CIDSuccessCount : 0
CIDFailureCount : 0
RingCount : 0
LastRang :
LastTapiError :

----------------------- Device #7
Class : TDeviceInfo
Dirty : False
Name : IPCONF LINE
Description : IPCONF LINE
IsTapiDevice : True
TapiId : 7
Installed : True
Use : False
Registered : False
Matched : True
AccessMode : TAPI
FastCallRefresh : True
ReopenOnCallEnd : False
LineCount : 1
New : False
LastGotCID :
LastGotNoCID :
CIDSuccessCount : 0
CIDFailureCount : 0
RingCount : 0
LastRang :
LastTapiError :

----------------------- Device #8
Class : TDeviceInfo
Dirty : False
Name : H323 Line
Description : H323 Line
IsTapiDevice : True
TapiId : 8
Installed : True
Use : False
Registered : False
Matched : True
AccessMode : TAPI
FastCallRefresh : True
ReopenOnCallEnd : False
LineCount : 1
New : False
LastGotCID :
LastGotNoCID :
CIDSuccessCount : 0
CIDFailureCount : 0
RingCount : 0
LastRang :
LastTapiError :

----------------------- Device #9
Class : TWhozzCallingInfo
Dirty : False
Name : Whozz Calling?
Description : Whozz Calling? - 1
IsTapiDevice : False
TapiId : 0
Installed : False
Use : False
Registered : False
Matched : False
AccessMode : COM Port
FastCallRefresh : True
ReopenOnCallEnd : False
LineCount : 1
New : False
LastGotCID :
LastGotNoCID :
CIDSuccessCount : 0
CIDFailureCount : 0
RingCount : 0
LastRang :
LastTapiError :


============================================================
==================== LINE MONITOR LOG ======================
============================================================
02.06.2006 15:01:29.863 - Caller ID Version 1.9.1.0 (14.01.2006 10:57:58)
02.06.2006 15:01:29.863 - C:\Program Files\Ascendis Caller ID\CallerID.EXE
02.06.2006 15:01:29.863 -
02.06.2006 15:01:30.082 - Found 9 lines
02.06.2006 15:01:30.082 -
02.06.2006 15:01:30.082 - Info for line 0:
02.06.2006 15:01:30.082 - Name = CXT10B5 - HCF PCI Modem
02.06.2006 15:01:30.082 - Bearer modes = LINEBEARERMODE_VOICE, LINEBEARERMODE_PASSTHROUGH
02.06.2006 15:01:30.082 - Media modes = LINEMEDIAMODE_UNKNOWN, LINEMEDIAMODE_INTERACTIVEVOICE, LINEMEDIAMODE_AUTOMATEDVOICE, LINEMEDIAMODE_DATAMODEM
02.06.2006 15:01:30.082 - Addresses = 1
02.06.2006 15:01:30.082 - Will NOT open line id 0 because device will not be accessed via TAPI
02.06.2006 15:01:30.082 -
02.06.2006 15:01:30.082 - Info for line 1:
02.06.2006 15:01:30.082 - Name = RAS PPPoE Line0000
02.06.2006 15:01:30.082 - Bearer modes = LINEBEARERMODE_DATA
02.06.2006 15:01:30.082 - Media modes = LINEMEDIAMODE_DIGITALDATA
02.06.2006 15:01:30.082 - Addresses = 1
02.06.2006 15:01:30.082 - Will NOT open line id 1 because options say to skip it
02.06.2006 15:01:30.082 -
02.06.2006 15:01:30.082 - Info for line 2:
02.06.2006 15:01:30.082 - Name = RAS VPN Line 0
02.06.2006 15:01:30.082 - Bearer modes = LINEBEARERMODE_DATA
02.06.2006 15:01:30.082 - Media modes = LINEMEDIAMODE_DIGITALDATA
02.06.2006 15:01:30.082 - Addresses = 1
02.06.2006 15:01:30.082 - Will NOT open line id 2 because options say to skip it
02.06.2006 15:01:30.082 -
02.06.2006 15:01:30.082 - Info for line 3:
02.06.2006 15:01:30.082 - Name = WAN/ATM/ADSL miniport
02.06.2006 15:01:30.082 - Bearer modes = LINEBEARERMODE_DATA
02.06.2006 15:01:30.082 - Media modes = LINEMEDIAMODE_DIGITALDATA
02.06.2006 15:01:30.082 - Addresses = 1
02.06.2006 15:01:30.082 - Will NOT open line id 3 because options say to skip it
02.06.2006 15:01:30.082 -
02.06.2006 15:01:30.082 - Info for line 4:
02.06.2006 15:01:30.082 - Name = Infrared Direct Linei
02.06.2006 15:01:30.082 - Bearer modes = LINEBEARERMODE_DATA
02.06.2006 15:01:30.082 - Media modes = LINEMEDIAMODE_UNKNOWN, LINEMEDIAMODE_DIGITALDATA
02.06.2006 15:01:30.082 - Addresses = 1
02.06.2006 15:01:30.082 - Will NOT open line id 4 because options say to skip it
02.06.2006 15:01:30.082 -
02.06.2006 15:01:30.082 - Info for line 5:
02.06.2006 15:01:30.082 - Name = WAN Miniport (L2TP)
02.06.2006 15:01:30.082 - Bearer modes = LINEBEARERMODE_DATA
02.06.2006 15:01:30.082 - Media modes = LINEMEDIAMODE_UNKNOWN, LINEMEDIAMODE_DIGITALDATA
02.06.2006 15:01:30.082 - Addresses = 1
02.06.2006 15:01:30.082 - Will NOT open line id 5 because options say to skip it
02.06.2006 15:01:30.082 -
02.06.2006 15:01:30.082 - Info for line 6:
02.06.2006 15:01:30.082 - Name = LPT1T
02.06.2006 15:01:30.082 - Bearer modes = LINEBEARERMODE_DATA
02.06.2006 15:01:30.082 - Media modes = LINEMEDIAMODE_UNKNOWN, LINEMEDIAMODE_DIGITALDATA
02.06.2006 15:01:30.082 - Addresses = 1
02.06.2006 15:01:30.082 - Will NOT open line id 6 because options say to skip it
02.06.2006 15:01:30.082 -
02.06.2006 15:01:30.082 - Info for line 7:
02.06.2006 15:01:30.082 - Name = IPCONF LINE
02.06.2006 15:01:30.082 - Bearer modes = LINEBEARERMODE_VOICE, LINEBEARERMODE_DATA
02.06.2006 15:01:30.082 - Media modes = LINEMEDIAMODE_UNKNOWN, LINEMEDIAMODE_INTERACTIVEVOICE, LINEMEDIAMODE_AUTOMATEDVOICE
02.06.2006 15:01:30.082 - Addresses = 1
02.06.2006 15:01:30.082 - Will NOT open line id 7 because options say to skip it
02.06.2006 15:01:30.082 -
02.06.2006 15:01:30.082 - Info for line 8:
02.06.2006 15:01:30.082 - Name = H323 Line
02.06.2006 15:01:30.082 - Bearer modes = LINEBEARERMODE_VOICE, LINEBEARERMODE_DATA
02.06.2006 15:01:30.082 - Media modes = LINEMEDIAMODE_UNKNOWN, LINEMEDIAMODE_INTERACTIVEVOICE, LINEMEDIAMODE_AUTOMATEDVOICE
02.06.2006 15:01:30.082 - Addresses = 1
02.06.2006 15:01:30.082 - Will NOT open line id 8 because options say to skip it
02.06.2006 15:01:30.082 -
02.06.2006 15:01:30.082 - Opened 0 of 9 lines through TAPI
02.06.2006 15:01:30.457 - Found 10 devices
02.06.2006 15:01:30.457 -
02.06.2006 15:01:30.457 - Opening modem "CXT10B5 - HCF PCI Modem" on COM3
02.06.2006 15:01:31.238 - [COM3] Opened CXT10B5 - HCF PCI Modem on port COM3
02.06.2006 15:01:31.504 - [COM3] Modem responded to "AT+VCID=1" with "OK"
02.06.2006 15:01:46.098 - [COM3] Received message from modem: "RING"
02.06.2006 15:01:46.098 - [COM3] Recognized RING
02.06.2006 15:01:46.098 - -calling OnNewCall-
02.06.2006 15:01:46.785 - >>OnRing
02.06.2006 15:01:47.504 - [COM3] Received message from modem: "DATE = 0206"
02.06.2006 15:01:47.504 - [COM3] Recognized DATE
02.06.2006 15:01:47.504 - [COM3] Received message from modem: "TIME = 1501"
02.06.2006 15:01:47.504 - [COM3] Recognized TIME
02.06.2006 15:01:47.504 - [COM3] Received message from modem: "NMBR = 0765763055"
02.06.2006 15:01:47.504 - [COM3] Recognized NMBR
02.06.2006 15:01:47.504 - [COM3] Received message from modem: "NMBR = 0328520925"
02.06.2006 15:01:47.504 - [COM3] Recognized NMBR
02.06.2006 15:01:47.504 - [COM3] Received message from modem: "TYPE = 01"
02.06.2006 15:01:47.504 - [COM3] Recognized TYPE
02.06.2006 15:01:47.504 - [COM3] Received message from modem: "MESG = 0A"
02.06.2006 15:01:47.504 - [COM3] Recognized MESG
02.06.2006 15:01:47.504 - [COM3] Received message from modem: "MESG = 455753442066726F6D205349454D454E53"
02.06.2006 15:01:47.504 - [COM3] Recognized MESG
02.06.2006 15:01:47.582 - <<OnRing
02.06.2006 15:01:48.629 - [COM3] Recognized end of caller id messages
02.06.2006 15:01:48.629 - >>TBRLine.CallOnCallerID: FastCallRefresh=True, FPostCallerIdRingCount=0, IsModem=False
02.06.2006 15:01:48.629 - >>OnCallerId(deviceName=CXT10B5 - HCF PCI Modem, name="", phoneNo="0328520925")
02.06.2006 15:01:49.332 - <<OnCallerId
02.06.2006 15:01:49.332 - <<TBRLine.CallOnCallerID
02.06.2006 15:01:49.410 - [COM3] Received message from modem: "RING"
02.06.2006 15:01:49.410 - [COM3] Recognized RING
02.06.2006 15:01:49.410 - >>OnRing
02.06.2006 15:01:50.145 - <<OnRing


============================================================
====================== MODEM LOG(S) ========================
============================================================

------------------------------------------------------------
MODEM LOG FOR "CXT10B5 - HCF PCI Modem" (id 0001):
------------------------------------------------------------
02-04-2006 01:37:36.457 - File: C:\WINDOWS\system32\tapisrv.dll, Version 5.1.2600
02-04-2006 01:37:36.457 - File: C:\WINDOWS\system32\unimdm.tsp, Version 5.1.2600
02-04-2006 01:37:36.457 - File: C:\WINDOWS\system32\unimdmat.dll, Version 5.1.2600
02-04-2006 01:37:36.457 - File: C:\WINDOWS\system32\uniplat.dll, Version 5.1.2600
02-04-2006 01:37:36.457 - File: C:\WINDOWS\system32\drivers\modem.sys, Version 5.1.2600
02-04-2006 01:37:36.457 - File: C:\WINDOWS\system32\modemui.dll, Version 5.1.2600
02-04-2006 01:37:36.457 - File: C:\WINDOWS\system32\mdminst.dll, Version 5.1.2600
02-04-2006 01:37:36.457 - Modem type: CXT10B5 - HCF PCI Modem
02-04-2006 01:37:36.457 - Modem inf path: oem4.inf
02-04-2006 01:37:36.457 - Modem inf section: Modem
02-04-2006 01:37:36.457 - Matching hardware ID: pci\ven_141a&dev_1035&subsys_1035141a
02-04-2006 01:37:37.207 - 115200,8,N,1, ctsfl=1, rtsctl=2
02-04-2006 01:37:37.207 - Initializing modem.
02-04-2006 01:37:37.207 - DSR is low while initializing the modem. Verify modem is turned on.
02-04-2006 01:37:37.223 - Send: AT<cr>
02-04-2006 01:37:37.223 - Recv: <cr><lf>OK<cr><lf>
02-04-2006 01:37:37.223 - Interpreted response: OK
02-04-2006 01:37:37.238 - Send: AT&FE0V1S0=0&C1&D2+MR=2;+DR=1;+ER=1;W0<cr>
02-04-2006 01:37:37.238 - Recv: <cr><lf>OK<cr><lf>
02-04-2006 01:37:37.238 - Interpreted response: OK
02-04-2006 01:37:37.254 - Send: ATS7=60M1+ES=3,0,2;+DS=3;+IFC=2,2;X4<cr>
02-04-2006 01:37:37.254 - Recv: <cr><lf>OK<cr><lf>
02-04-2006 01:37:37.254 - Interpreted response: OK
02-04-2006 01:37:37.254 - Sending user initialization commands.
02-04-2006 01:37:37.270 - Send: ATs11=50<cr>
02-04-2006 01:37:37.270 - Recv: <cr><lf>OK<cr><lf>
02-04-2006 01:37:37.270 - Interpreted response: OK
02-04-2006 01:37:37.270 - Waiting for a call.
02-04-2006 01:37:37.285 - Send: at+vcid=1<cr>
02-04-2006 01:37:37.285 - Recv: <cr><lf>OK<cr><lf>
02-04-2006 01:37:37.285 - Interpreted response: OK
02-04-2006 01:37:37.301 - Send: ATS0=0<cr>
02-04-2006 01:37:37.301 - Recv: <cr><lf>OK<cr><lf>
02-04-2006 01:37:37.301 - Interpreted response: OK
02-04-2006 01:37:41.848 - Session Statistics:
02-04-2006 01:37:41.848 - Reads : 36 bytes
02-04-2006 01:37:41.848 - Writes: 105 bytes
02-06-2006 14:54:09.520 - File: C:\WINDOWS\system32\tapisrv.dll, Version 5.1.2600
02-06-2006 14:54:09.535 - File: C:\WINDOWS\system32\unimdm.tsp, Version 5.1.2600
02-06-2006 14:54:09.535 - File: C:\WINDOWS\system32\unimdmat.dll, Version 5.1.2600
02-06-2006 14:54:09.551 - File: C:\WINDOWS\system32\uniplat.dll, Version 5.1.2600
02-06-2006 14:54:09.567 - File: C:\WINDOWS\system32\drivers\modem.sys, Version 5.1.2600
02-06-2006 14:54:09.582 - File: C:\WINDOWS\system32\modemui.dll, Version 5.1.2600
02-06-2006 14:54:09.582 - File: C:\WINDOWS\system32\mdminst.dll, Version 5.1.2600
02-06-2006 14:54:09.582 - Modem type: CXT10B5 - HCF PCI Modem
02-06-2006 14:54:09.582 - Modem inf path: oem4.inf
02-06-2006 14:54:09.582 - Modem inf section: Modem
02-06-2006 14:54:09.582 - Matching hardware ID: pci\ven_141a&dev_1035&subsys_1035141a
02-06-2006 14:54:10.426 - Opening Modem
02-06-2006 14:54:10.426 - 115200,8,N,1, ctsfl=1, rtsctl=2
02-06-2006 14:54:10.426 - Initializing modem.
02-06-2006 14:54:10.457 - DSR is low while initializing the modem. Verify modem is turned on.
02-06-2006 14:54:10.473 - Send: AT<cr>
02-06-2006 14:54:10.488 - Recv: <cr><lf>OK<cr><lf>
02-06-2006 14:54:10.488 - Interpreted response: OK
02-06-2006 14:54:10.504 - Send: AT&FE0V1S0=0&C1&D2+MR=2;+DR=1;+ER=1;W0<cr>
02-06-2006 14:54:10.504 - Recv: <cr><lf>OK<cr><lf>
02-06-2006 14:54:10.504 - Interpreted response: OK
02-06-2006 14:54:10.520 - Send: ATS7=60M1+ES=3,0,2;+DS=3;+IFC=2,2;X4<cr>
02-06-2006 14:54:10.520 - Recv: <cr><lf>OK<cr><lf>
02-06-2006 14:54:10.520 - Interpreted response: OK
02-06-2006 14:54:10.520 - Sending user initialization commands.
02-06-2006 14:54:10.535 - Send: ATs11=50<cr>
02-06-2006 14:54:10.535 - Recv: <cr><lf>OK<cr><lf>
02-06-2006 14:54:10.535 - Interpreted response: OK
02-06-2006 14:54:10.535 - Waiting for a call.
02-06-2006 14:54:10.551 - Send: at+vcid=1<cr>
02-06-2006 14:54:10.567 - Recv: <cr><lf>OK<cr><lf>
02-06-2006 14:54:10.567 - Interpreted response: OK
02-06-2006 14:54:10.567 - Send: ATS0=0<cr>
02-06-2006 14:54:10.582 - Recv: <cr><lf>OK<cr><lf>
02-06-2006 14:54:10.582 - Interpreted response: OK
02-06-2006 14:54:44.863 - Session Statistics:
02-06-2006 14:54:44.863 - Reads : 36 bytes
02-06-2006 14:54:44.863 - Writes: 105 bytes
02-06-2006 14:54:44.910 - File: C:\WINDOWS\system32\tapisrv.dll, Version 5.1.2600
02-06-2006 14:54:44.910 - File: C:\WINDOWS\system32\unimdm.tsp, Version 5.1.2600
02-06-2006 14:54:44.910 - File: C:\WINDOWS\system32\unimdmat.dll, Version 5.1.2600
02-06-2006 14:54:44.910 - File: C:\WINDOWS\system32\uniplat.dll, Version 5.1.2600
02-06-2006 14:54:44.910 - File: C:\WINDOWS\system32\drivers\modem.sys, Version 5.1.2600
02-06-2006 14:54:44.910 - File: C:\WINDOWS\system32\modemui.dll, Version 5.1.2600
02-06-2006 14:54:44.910 - File: C:\WINDOWS\system32\mdminst.dll, Version 5.1.2600
02-06-2006 14:54:44.910 - Modem type: CXT10B5 - HCF PCI Modem
02-06-2006 14:54:44.910 - Modem inf path: oem4.inf
02-06-2006 14:54:44.910 - Modem inf section: Modem
02-06-2006 14:54:44.910 - Matching hardware ID: pci\ven_141a&dev_1035&subsys_1035141a
02-06-2006 14:54:45.676 - Opening Modem
02-06-2006 14:54:45.676 - 115200,8,N,1, ctsfl=1, rtsctl=2
02-06-2006 14:54:45.676 - Initializing modem.
02-06-2006 14:54:45.676 - DSR is low while initializing the modem. Verify modem is turned on.
02-06-2006 14:54:45.692 - Send: AT<cr>
02-06-2006 14:54:45.692 - Recv: <cr><lf>OK<cr><lf>
02-06-2006 14:54:45.692 - Interpreted response: OK
02-06-2006 14:54:45.707 - Send: AT&FE0V1S0=0&C1&D2+MR=2;+DR=1;+ER=1;W0<cr>
02-06-2006 14:54:45.707 - Recv: <cr><lf>OK<cr><lf>
02-06-2006 14:54:45.707 - Interpreted response: OK
02-06-2006 14:54:45.723 - Send: ATS7=60M1+ES=3,0,2;+DS=3;+IFC=2,2;X4<cr>
02-06-2006 14:54:45.723 - Recv: <cr><lf>OK<cr><lf>
02-06-2006 14:54:45.723 - Interpreted response: OK
02-06-2006 14:54:45.723 - Sending user initialization commands.
02-06-2006 14:54:45.738 - Send: ATs11=50<cr>
02-06-2006 14:54:45.738 - Recv: <cr><lf>OK<cr><lf>
02-06-2006 14:54:45.738 - Interpreted response: OK
02-06-2006 14:54:45.738 - Waiting for a call.
02-06-2006 14:54:45.754 - Send: at+vcid=1<cr>
02-06-2006 14:54:45.754 - Recv: <cr><lf>OK<cr><lf>
02-06-2006 14:54:45.754 - Interpreted response: OK
02-06-2006 14:54:45.770 - Send: ATS0=0<cr>
02-06-2006 14:54:45.770 - Recv: <cr><lf>OK<cr><lf>
02-06-2006 14:54:45.770 - Interpreted response: OK
02-06-2006 14:55:31.707 - Session Statistics:
02-06-2006 14:55:31.707 - Reads : 36 bytes
02-06-2006 14:55:31.707 - Writes: 105 bytes


============================================================
==================== MODEM RESPONSES =======================
============================================================

------------------------------------------------------------
MODEM RESPONSES FOR "CXT10B5 - HCF PCI Modem" (id 0001):
------------------------------------------------------------
REGEDIT4

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Unimodem\DeviceSpecific\CXT10B5 - HCF PCI Modem::Conexant::Conexant\Responses]
"<cr><lf>OK<cr><lf>"=hex:00,00,00,00,00,00,00,00,00,00
"<cr><lf>CONNECT<cr><lf>"=hex:02,00,00,00,00,00,00,00,00,00
"<cr><lf>ERROR<cr><lf>"=hex:03,00,00,00,00,00,00,00,00,00
"<cr><lf>+FCERROR<cr><lf>"=hex:03,00,00,00,00,00,00,00,00,00
"<cr><lf>NO CARRIER<cr><lf>"=hex:04,00,00,00,00,00,00,00,00,00
"<cr><lf>NO DIALTONE<cr><lf>"=hex:05,00,00,00,00,00,00,00,00,00
"<cr><lf>BUSY<cr><lf>"=hex:06,00,00,00,00,00,00,00,00,00
"<cr><lf>NO ANSWER<cr><lf>"=hex:07,00,00,00,00,00,00,00,00,00
"<cr><lf>RING<cr><lf>"=hex:08,00,00,00,00,00,00,00,00,00
"<cr><lf>DELAYED:"=hex:1d,00,00,00,00,00,00,00,00,00
"<cr><lf>BLACKLISTED<cr><lf>"=hex:1c,00,00,00,00,00,00,00,00,00
"<cr><lf>RESTRICTED<cr><lf>"=hex:1c,00,00,00,00,00,00,00,00,00
"0<cr>"=hex:00,00,00,00,00,00,00,00,00,00
"1<cr>"=hex:02,00,00,00,00,00,00,00,00,00
"2<cr>"=hex:08,00,00,00,00,00,00,00,00,00
"3<cr>"=hex:04,00,00,00,00,00,00,00,00,00
"4<cr>"=hex:03,00,00,00,00,00,00,00,00,00
"5<cr>"=hex:02,00,b0,04,00,00,00,00,00,00
"6<cr>"=hex:05,00,00,00,00,00,00,00,00,00
"7<cr>"=hex:06,00,00,00,00,00,00,00,00,00
"8<cr>"=hex:07,00,00,00,00,00,00,00,00,00
"<cr><lf>CONNECT 0600<cr><lf>"=hex:02,00,00,00,00,00,58,02,00,00
"<cr><lf>CONNECT 1200<cr><lf>"=hex:02,00,00,00,00,00,b0,04,00,00
"<cr><lf>CONNECT 2400<cr><lf>"=hex:02,00,00,00,00,00,60,09,00,00
"<cr><lf>CONNECT 4800<cr><lf>"=hex:02,00,00,00,00,00,c0,12,00,00
"<cr><lf>CONNECT 7200<cr><lf>"=hex:02,00,00,00,00,00,20,1c,00,00
"<cr><lf>CONNECT 9600<cr><lf>"=hex:02,00,00,00,00,00,80,25,00,00
"<cr><lf>CONNECT 14400<cr><lf>"=hex:02,00,00,00,00,00,40,38,00,00
"<cr><lf>CONNECT 19200<cr><lf>"=hex:02,00,00,00,00,00,00,4b,00,00
"<cr><lf>CONNECT 28800<cr><lf>"=hex:02,00,00,00,00,00,80,70,00,00
"<cr><lf>CONNECT 38400<cr><lf>"=hex:02,00,00,00,00,00,00,96,00,00
"<cr><lf>CONNECT 57600<cr><lf>"=hex:02,00,00,00,00,00,00,e1,00,00
"<cr><lf>CONNECT 115200<cr><lf>"=hex:02,00,00,00,00,00,00,c2,01,00
"<cr><lf>+MRR: 300<cr><lf>"=hex:01,00,2c,01,00,00,00,00,00,00
"<cr><lf>+MRR: 600<cr><lf>"=hex:01,00,58,02,00,00,00,00,00,00
"<cr><lf>+MRR: 1200<cr><lf>"=hex:01,00,b0,04,00,00,00,00,00,00
"<cr><lf>+MRR: 2400<cr><lf>"=hex:01,00,60,09,00,00,00,00,00,00
"<cr><lf>+MRR: 4800<cr><lf>"=hex:01,00,c0,12,00,00,00,00,00,00
"<cr><lf>+MRR: 7200<cr><lf>"=hex:01,00,20,1c,00,00,00,00,00,00
"<cr><lf>+MRR: 9600<cr><lf>"=hex:01,00,80,25,00,00,00,00,00,00
"<cr><lf>+MRR: 12000<cr><lf>"=hex:01,00,e0,2e,00,00,00,00,00,00
"<cr><lf>+MRR: 14400<cr><lf>"=hex:01,00,40,38,00,00,00,00,00,00
"<cr><lf>+MRR: 16800<cr><lf>"=hex:01,00,a0,41,00,00,00,00,00,00
"<cr><lf>+MRR: 19200<cr><lf>"=hex:01,00,00,4b,00,00,00,00,00,00
"<cr><lf>+MRR: 21600<cr><lf>"=hex:01,00,60,54,00,00,00,00,00,00
"<cr><lf>+MRR: 24000<cr><lf>"=hex:01,00,c0,5d,00,00,00,00,00,00
"<cr><lf>+MRR: 26400<cr><lf>"=hex:01,00,20,67,00,00,00,00,00,00
"<cr><lf>+MRR: 28000<cr><lf>"=hex:01,00,60,6d,00,00,00,00,00,00
"<cr><lf>+MRR: 28800<cr><lf>"=hex:01,00,80,70,00,00,00,00,00,00
"<cr><lf>+MRR: 29333<cr><lf>"=hex:01,00,95,72,00,00,00,00,00,00
"<cr><lf>+MRR: 30000<cr><lf>"=hex:01,00,30,75,00,00,00,00,00,00
"<cr><lf>+MRR: 30667<cr><lf>"=hex:01,00,cb,77,00,00,00,00,00,00
"<cr><lf>+MRR: 31200<cr><lf>"=hex:01,00,e0,79,00,00,00,00,00,00
"<cr><lf>+MRR: 32000<cr><lf>"=hex:01,00,00,7d,00,00,00,00,00,00
"<cr><lf>+MRR: 33333<cr><lf>"=hex:01,00,35,82,00,00,00,00,00,00
"<cr><lf>+MRR: 33600<cr><lf>"=hex:01,00,40,83,00,00,00,00,00,00
"<cr><lf>+MRR: 34000<cr><lf>"=hex:01,00,d0,84,00,00,00,00,00,00
"<cr><lf>+MRR: 34667<cr><lf>"=hex:01,00,6b,87,00,00,00,00,00,00
"<cr><lf>+MRR: 36000<cr><lf>"=hex:01,00,a0,8c,00,00,00,00,00,00
"<cr><lf>+MRR: 37333<cr><lf>"=hex:01,00,d5,91,00,00,00,00,00,00
"<cr><lf>+MRR: 38000<cr><lf>"=hex:01,00,70,94,00,00,00,00,00,00
"<cr><lf>+MRR: 38667<cr><lf>"=hex:01,00,0b,97,00,00,00,00,00,00
"<cr><lf>+MRR: 40000<cr><lf>"=hex:01,00,40,9c,00,00,00,00,00,00
"<cr><lf>+MRR: 41333<cr><lf>"=hex:01,00,75,a1,00,00,00,00,00,00
"<cr><lf>+MRR: 42000<cr><lf>"=hex:01,00,10,a4,00,00,00,00,00,00
"<cr><lf>+MRR: 42667<cr><lf>"=hex:01,00,ab,a6,00,00,00,00,00,00
"<cr><lf>+MRR: 44000<cr><lf>"=hex:01,00,e0,ab,00,00,00,00,00,00
"<cr><lf>+MRR: 45333<cr><lf>"=hex:01,00,15,b1,00,00,00,00,00,00
"<cr><lf>+MRR: 46000<cr><lf>"=hex:01,00,b0,b3,00,00,00,00,00,00
"<cr><lf>+MRR: 46667<cr><lf>"=hex:01,00,4b,b6,00,00,00,00,00,00
"<cr><lf>+MRR: 48000<cr><lf>"=hex:01,00,80,bb,00,00,00,00,00,00
"<cr><lf>+MRR: 49333<cr><lf>"=hex:01,00,b5,c0,00,00,00,00,00,00
"<cr><lf>+MRR: 50000<cr><lf>"=hex:01,00,50,c3,00,00,00,00,00,00
"<cr><lf>+MRR: 50667<cr><lf>"=hex:01,00,eb,c5,00,00,00,00,00,00
"<cr><lf>+MRR: 52000<cr><lf>"=hex:01,00,20,cb,00,00,00,00,00,00
"<cr><lf>+MRR: 53333<cr><lf>"=hex:01,00,55,d0,00,00,00,00,00,00
"<cr><lf>+MRR: 54000<cr><lf>"=hex:01,00,f0,d2,00,00,00,00,00,00
"<cr><lf>+MRR: 54667<cr><lf>"=hex:01,00,8b,d5,00,00,00,00,00,00
"<cr><lf>+MRR: 56000<cr><lf>"=hex:01,00,c0,da,00,00,00,00,00,00
"<cr><lf>+DR: NONE<cr><lf>"=hex:01,00,00,00,00,00,00,00,00,00
"<cr><lf>+DR: MNP5<cr><lf>"=hex:01,01,00,00,00,00,00,00,00,00
"<cr><lf>+DR: V42B<cr><lf>"=hex:01,01,00,00,00,00,00,00,00,00
"<cr><lf>+DR: V44<cr><lf>"=hex:01,01,00,00,00,00,00,00,00,00
"<cr><lf>+ER: NONE<cr><lf>"=hex:01,00,00,00,00,00,00,00,00,00
"<cr><lf>+ER: ALT<cr><lf>"=hex:01,02,00,00,00,00,00,00,00,00
"<cr><lf>+ER: LAPM<cr><lf>"=hex:01,02,00,00,00,00,00,00,00,00
"<cr><lf>+MCR: V92<cr><lf>"=hex:01,00,00,00,00,00,00,00,00,00
"<cr><lf>+MCR: V90<cr><lf>"=hex:01,00,00,00,00,00,00,00,00,00
"<cr><lf>+MCR: K56<cr><lf>"=hex:01,00,00,00,00,00,00,00,00,00
"<cr><lf>+MCR: V34<cr><lf>"=hex:01,00,00,00,00,00,00,00,00,00
"<cr><lf>+MCR: V32B<cr><lf>"=hex:01,00,00,00,00,00,00,00,00,00
"<cr><lf>+MCR: V32<cr><lf>"=hex:01,00,00,00,00,00,00,00,00,00
"<cr><lf>+MCR: V22B<cr><lf>"=hex:01,00,00,00,00,00,00,00,00,00
"<cr><lf>+MCR: V22<cr><lf>"=hex:01,00,00,00,00,00,00,00,00,00
"<cr><lf>+MCR: V23C<cr><lf>"=hex:01,00,00,00,00,00,00,00,00,00
"<cr><lf>+MCR: V21<cr><lf>"=hex:01,00,00,00,00,00,00,00,00,00
"<cr><lf>+MCR: B212<cr><lf>"=hex:01,00,00,00,00,00,00,00,00,00
"<cr><lf>+MCR: B103<cr><lf>"=hex:01,00,00,00,00,00,00,00,00,00
"<cr><lf>DATE = "=hex:93,00,00,00,00,00,00,00,00,00
"TIME = "=hex:94,00,00,00,00,00,00,00,00,00
"NMBR = "=hex:95,00,00,00,00,00,00,00,00,00
"NAME = "=hex:96,00,00,00,00,00,00,00,00,00
"MESG = "=hex:97,00,00,00,00,00,00,00,00,00
"<cr><lf>DRON="=hex:91,00,00,00,00,00,00,00,00,00
"<cr><lf>DROF="=hex:92,00,00,00,00,00,00,00,00,00
"<cr>"=hex:01,00,00,00,00,00,00,00,00,00
"<lf>"=hex:01,00,00,00,00,00,00,00,00,00
"<cr><lf>NMBR = "=hex:95,00,00,00,00,00,00,00,00,00


============================================================
===================== MODEM ANALYSIS =======================
============================================================

------------------------------------------------------------
MODEM ANALYSIS FOR "CXT10B5 - HCF PCI Modem" (id 0001):
------------------------------------------------------------
--- NO PROBLEMS FOUND ---

Bill Root
Site Admin
Posts: 1008
Joined: Mon Jan 19, 2004 1:29 pm
Location: Perrysburg, OH
Contact:

Two NMBR messages from modem

Post by Bill Root »

I just posted a new beta version that I hope will solve your problem. You can download the beta installer from the beta page:

http://ascendis.com/callerid/beta.php

Install it right over your current version.

I think the new version will solve your problem immediately, since the NMBR you want reported is the first one (if I read your post correctly). Otherwise, open the Device Properties window for your modem (Ascendis Caller ID Options window, Devices page) and change the setting for "Prefer (first or second) NMBR message".

If the new version doesn't fix the problem, please send a Technical Support Report.

Finest regards,
Bill Root
Ascendis Software

Anotherone

Post by Anotherone »

Thank you for last release.
Everything works like swiss watch :D
Thanks

Bill Root
Site Admin
Posts: 1008
Joined: Mon Jan 19, 2004 1:29 pm
Location: Perrysburg, OH
Contact:

Two NMBR messages from modem

Post by Bill Root »

Great! You're welcome!

bobi
Posts: 1
Joined: Sun Apr 16, 2006 9:00 am

Post by bobi »

I live in Sofia, Bulgaria. Some time ago I wrote a linux CID-processing software for my own needs and I found the same behavior from our phone station computer, which is also EWSD from Siemens. I think it will be a good idea to add an option to show the two numbers in separate columns, since the second number is not just your phone number, but the number the calling party actually dialed. It's useful to distinguish a case of a diverted call, when the second NMBR message would show you the number where the call is diverted from. Maybe it's also a good idea for the program to know your phone number and to indicate a diverted call if the second NMBR message is something different from your own number.
It seems you'll have to add a submenu for "EWSD from Siemens".. ;)

Bill Root
Site Admin
Posts: 1008
Joined: Mon Jan 19, 2004 1:29 pm
Location: Perrysburg, OH
Contact:

Re: Dialed number

Post by Bill Root »

Hello bobi,

Thank you for your informative post. This is very helpful. We're still deciding whether and how we would support this in some future version.

Finest regards,
Bill Root
Ascendis Software

Post Reply